HSM 805HD 6WD

Need a little extra?

The 805HD 6WD forestry hauler from HSM has the best power reserves among 4-cylinder models. On the 805HD 6WD, everything is slightly more "heavy duty" – axles, hydraulics, crane and much more. This makes it a compact and high performing special forestry hauler for medium to thick trunk timber.

Engine (4 cyl.):
  • VOLVO
    TAD571VE EU Stage IV / EPA T4f
    Engine output:129 kW (175 HP) ab 1700 rpm
    Max. rpm:800 Nm von 1100 - 1500 rpm
    Max. torque: 810 Nm bei 1200 rpm
    Engine capacity:5,13 liters

    Optional:

  • VOLVO
    TAD572VE EU Stage IV / EPA T4f
    Engine output:160 kW (218 HP) ab 1700 rpm
    Max. rpm:900 Nm von 1200 - 1700 rpm
    Max. torque: 910 Nm bei 1450 rpm
    Engine capacity:5,13 liters
Transmission:
  • HSM TwinPowerDrive
Axles:
  • Planetary axles
  • 100% separately selectable differential locks, front and rear
Brake:
  • 2-circuit brake, disk brake running in an oil bath
  • Spring-loaded parking brake
Steering:
  • Articulated steering with 2 cylinders
  • 45° steering angle
Tank capacity:
  • Diesel: 175 l
  • AdBlue: 25 l
  • Hydraulic fluid: 90 l
Hydraulics:
  • Load sensing
  • Pump output: Flow rate: 232 litres/min at 1600 rpm
    Pressure: up to 350 bar
  • Hydraulic fluid:
    Saturated, synthetic ester
    Panolin HLP SYNTH with Kleenoil
    Microfiltration, WGK 1
Cabin:
  • HSM Panorama comfort cab
  • ROPS, FOPS, OPS tested safety cab
  • Swivel seat device, air-suspended comfort seat
  • heating/air-conditioning
Electrical system / Instruments:
  • HSM Ecommand colour-display
  • 5 operator programs + factory setting
  • diagnosis-tool and error-indication, graphic support at parameter editing
  • generator 110 A (28 V)
  • 2 service-free dry batteries á 55 Ah
Standard equipment:
  • 12 LED work lamps, 24 V - 12 V voltage transformer, Radio with CD player, fire extinguisher, first-aid kit, warning, triangle, tool set
  • Torsion lock with 2 hydraulic cylinders and much more
Special accessories:
  • Tiltable front polder shield, front loader (Hauer), trailer hitch, outer hydraulic connection, remote control for cable winch, wireless driving, auxiliary heating, sun blinds, seat damping pad
  • Additional accessories on request
Winches:
  • Standard:
    Adler HY 20 (2 x 100 kN) double-drum winch
    Max. cable take-up of 14 mm, 100 m
  • Optional:
    Adler HY 24-O (2 x 120 kN) double-drum winch
    Max. cable take-up of 14 mm, 130 m
    Adler HY 32-O (2 x 160 kN) double-drum winch
    Max. cable take-up of 16 mm, 100 m
Weight:
  • from 15300 kg
Forwarder:
  • Epsilon S120 R80
    (max. range 8 m, lifting moment 139 kNm gross)
  • Epsilon S120 R96
    (max. range 9.6 m, lifting moment 139 kNm gross)
Tyres:
Series: Size: Minimum width: H: F:
At the front: 23,1 x 26 2550 mm 3595 530
At the rear: 710/45x26,5      

The minimum width changes when using belts (+100). Other tyres on request.

Standard equipment:
  • Fixed front polder shield, 2000 mm wide
  • Straight shield as sprag brake
Special equipment:
  • Clamping workbench on height-adjustable roller block
  • "Skidder France" version pulley
  • Engine bonnet protection and brush guard made from tubing
  • Additional accessories on request
  • Bogielift back
HSM Crane-list EPSILON

X = available with surcharge, O = standard equipment, # = not available

EPSILON

Crane type Lifting
moment
Range Gripper
type
805F / Kombi
M70 F80 102/68 kNm 8,0 m FG43S O
M70 F86 102/68 kNm 8,6 m FG43S X
M70 F101 102/65 kNm 10,1 m FG43S X
M80 F80 114/79 kNm 8,0 m FG43S X
M80 F86 114/79 kNm 8,6 m FG43S X
M80 F101 114/75 kNm 10,1 m FG43S X
S100 F80 128/91 kNm 8,0 m FG43S X
S100 F86 128/90 kNm 8,6 m FG43S X
S100 F101 128/86 kNm 10,1 m FG43S #
S110 F80 143/104 kNm 8,0 m FG43S #
S110 F86 143/104 kNm 8,6 m FG43S #
S110 F101 143/100 kNm 10,1 m FG43S #
X120 F80 159/111 kNm 8,0 m FG43S #
X120 F86 159/110 kNm 8,6 m FG43S #
X120 F102 159/107 kNm 10,2 m FG43S #
X140 F80 173/123 kNm 8,0 m FG43S #
X140 F86 173/122 kNm 8,6 m FG43S #
X140 F102 173/119 kNm 10,2 m FG43S #

Low crane pillar (height: 1730 mm)

HSM Crane-list Mesera

X = available with surcharge, O = standard equipment, # = not available

Mesera

Crane type Lifting
moment
Range Gripper
type
805F / Kombi
F71 F72 99/75 kNm 7,2 m FG43S X
F71 FT85 99/70 kNm 8,5 m FG43S X
F71 FT100 99/66 kNm 10,0 m FG43S X
F71 FT100i 99/66 kNm 10,0 m FG43S X
F83 F72 106/82 kNm 7,2 m FG43S X
F83 FT85 106/76 kNm 8,5 m FG43S X
F83 FT100i 106/73 kNm 10,0 m FG43S X
M 92 F80i 130/84 kNm 8,0 m FG43S X
M 92 FT86i 130/84 kNm 8,6 m FG43S #
M 92 FT100i 130/84 kNm 10,0 m FG43S #
F111 F72 151/111 kNm 7,2 m FG43S #
F111 F85 151/100 kNm 8,5 m FG43S #
F111 FT85 151/100 kNm 8,5 m FG43S #
F111 FT91 151/98 kNm 9,1 m FG43S #
F111 FT100 151/101 kNm 10,0 m FG43S #
M122 F85i 155/110 kNm 8,5 m FG43S #
M122 F96i 155/ - kNm 9,6 m FG43S #
M122 FT100i 155/ - kNm 10,0 m FG43S #
M142 F85i 178/132 kNm 8,5 m FG43S #
M142 F96i 178/124 kNm 9,6 m FG43S #
M142 FT100i 178/ - kNm 10,0 m FG43S #
The variable rear

Last stanchion variable in "short" position

Last stanchion variable in "centre" position

Last stanchion variable in "long" position

Quick-change twin stanchion for 2 x 2 or 2 x 2.5 m wood (not for 805F short version)

Height-adjustable pulleys up to 2 m

Rope forwarding possible without reconfiguring the stanchion

Log forwarding with quick-change clamping workbench

Rope forwarding possible without reconfiguring the clamping workbench