HSM 405H2 8WD

An "all-rounder" is one way of describing the HSM 405H2. An above-average machine for forestry management work. The concept of the H2 is growing in popularity. With the production of this harvester, HSM covers the demand from medium to thick trunk timber operations. This is backed up by performance figures. Whether it is the L220 crane from Loglift with 10m reach, 175 kN pulling force, 700/50 26.5 tyres or the 172 kW common rail diesel engine from Iveco, HSM combines high performance with the highest level of quality and impressive offroad capability in the 405H2. The concept is rounded off with harvester heads from Waratah that have proven their worth a thousand times over.

The HSM 405H2 harvester – a premium class forestry engineering package.

Engine (6 cylinders):
  • VOLVO
    TAD872VE EU Stage IV / EPA T4f
    Engine output: 210 kW (286 PS) / 1700 rpm
    Torque: 1225 Nm from 1100-1600 rpm
    Max torque: 1235 Nm at 1350 rpm
    Engine capacity: 7.7 liter
Transmission:
  • Hydrostatic-mechanical
  • NAF 2-speed transfer gearbox
Axles:
  • NAF balanced portal tandem axles
  • At the front: 100 % selectable differential lock
  • At the rear: 100 % selectable differential lock
Brake:
  • 2-circuit brake, disk brakes running in an oil bath
  • Spring-loaded parking brake
Steering:
  • Articulated steering with 2 cylinders
  • 2 steering cylinders, 50° steering angle
Tyres:
  Size: Total width:
Series: 710/45-26,5 2880 mm Tapes and chains
Optional: 800/40-26,5 2980 mm only tapes
    3060 mm Tapes and chain
  600/55-26,5 2660 mm Tapes and chains
Tank capacity:
  • Diesel: 500 liters
  • AdBlue: 45 liters
  • Hydraulic fluid: 250 liters
Hydraulics:
  • Load sensing
  • Variable pump: Crane pump: 190 cm³
    Head pump: 190 cm³
    Flow rate: 532 l/min at 1400 rpm
    Pressure: up to 380 bar
  • Hydraulic fluid: Saturated, synthetic ester
    Panolin HLP SYNTH with Kleenoil
    Microfiltration; WGK 1
Cabin:
  • Height-adjustable at the front / rear +11° / -11° (restricted to -26°)
  • Bent Lexan windscreen
  • Windscreen wipers in the front and at the side
  • ROPS, FOPS, OPS tested safety cab
  • Air cushioned seat with seat heating
  • Hot water heating
  • Auxiliary heating with cooling water and hydraulic oil preheating
  • Air conditioner
  • Optional height-adjustable and rotatable (270°), front / rear +11° / -13°, lateral +/- 9°
  • Optional: Sun blinds
Electrical system / Instruments:
  • HSM Ecommand colour-display
  • 5 operator programs + factory setting
  • Diagnosis-tool and error-indication
  • Graphic support at parameter editing
  • Generator 110 A (28 A)
  • 2 service-free dry batteries á 75 Ah
Weight:
  • from 25 400 kg
Torsion lock:
  • 2 hydraulic cylinders
Crane:
  • Mesera M221 H100
    Range: 10 m
    Gross lifting moment: 188 kNm
    Pivoting moment: 43,6 kNm
    Pivot angle: 260°
    Tilt angle: +24°/-30°

    Optional:

  • Mesera M240 H103
    Range: 10,3 m
    Gross lifting moment: 240 kNm
    Pivoting moment: 54 kNm
    Pivot angle: 260°
    Tilt angle: +24°/-30°
Aggregate:
  • Logmax 4000B with Super Cut
    Falling diameter: 500 mm
    Delimbing diameter: 355 mm
    Max. feed force: 19.5 kN
    Max. feed force speed: 4.3 m/s
    Max. operating pressure: 250 bar
    Weight: 653 kg
  • Control: DASA
  • Other aggregates on request
Series equipment:
  • 20 LED work lights on the cab, 4 work lights in front of the crane, 2 LED work lights on the crane column, 2 LED work lights on the rear frame, bogie lift front separately switchable, voltage converter on-board voltage 24 V to 12 V, end cushioning for crane and steering cylinder, radio, fire extinguisher, first-aid kit, warning triangle, tool set, bypass filter, Diesel fill pump, hydraulic fill pump, vacuum pump
Special accessories:
  • GPS system
  • Data transfer
  • Bogielift engine carriage
  • Attachement steep slope winch, traction constant 120 kN ,max. 150 kN
  • Air compressor 24 V
  • Guard bracket bonnet
Crane M221 H100:
Lifting moment brutto 188 kNm
Swivering moment 43,6 kNm
Swivel angle 260°
Crane M240 H103:
Lifting moment brutto 240 kNm
Swivering moment 54 kNm
Swivel angle 260°
Crane M280 V110:
Lifting moment brutto 280 kNm
Swivering moment 65 kNm
Swivel angle 260°
Crane X270 H107:
Lifting moment brutto 270 kNm
Swivering moment 92 kNm
Swivering moment 260°